Activity: Print Something

Time to actually print something! Follow these steps, and be sure to ask one of the instructors or one of your classmates for help when you need it!

1. Download a file. Using one of the class computers, head over to Printables and download an .stl file for a simple, pre-designed 3D item. (That link takes you to a filtered list of quick prints. Feel free to clear the filters to look at more elaborate prints. You will learn to design your own objects in other lessons.) Printables is one of many websites that allow anyone to upload and share their 3D designs. Some suggestions have been linked for you, but feel free to select any easy-to-print item. (Ask your instructor for recommendations if you’re not sure.)
   
   Some suggestions:
   Easy Print Kids Building Toys (from Thingiverse)
   Bubble Wand (from Thingiverse)
   Or find your own: Printables
   
   There are a number of download choices; you’re looking to download an .stl file. Feel free to ask for help if you need it!
   
2. Open the downloaded file in Bambu Studio.
3. Select a printer. Click on Device on the top toolbar of Bambu Studio, and select a 3d printer that isn’t currently in use. There are 4 Bambu P1S printers, numbered 1 through 4 from left to right.
4. Slice your design. Press the Slice plate button. Look on the bottom for an alert that says “Slice OK”.
5. Send your design to print. Press the Print plate button.
6. Remove your print job. Ask one of the isntructors to help you remove the print job.
7. Take a picture of your printed object, and upload it below.

Remember, you must be logged in to be able to submit a picture of your printed object!